Operation Maintenance Section C

From ProStar Geocorp

This page details how to fill out section C of the Operation Maintenance form.

 

Pre-requisites

  1. Select the applicable forms from the Pipeline Task list 
  2. Complete Section A
  3. Select the C tab at the top of the dialog box. 
    The CP Protection Installation/Repair - Section C dialog displays. 
    Use the right-side scroll bar to view and access all of the fields and check boxes. 
    TE OM Section C 1.png
    TE OM Section C 2.png
  4. Complete the C tab by completing each field as required or necessary:
Field Action
Install or Repair Select either Install or Repair radio button.
Anode Select this check box if installing or repairing anodes.
Anode Type Select value from the drop-down list.
No of Anodes Enter the number of Anodes.
Anode Backfill Material Enter the Anode Backfill Material.
Anode Spacing Enter the Anode Spacing in Ft. and In.
Anode Depth Enter the Depth of the Anode in Ft. and In.
Ground Bed Select this check box if working in ground beds.
Test Lead Select this check box of working on test leads.
Coupon Test Station Select this check box if involving coupon test station.
Bond Select this check box if performing a bond.
If Bond Selected Select a value from the drop-down list.
Method of Attachment Select a value from the drop-down list.
Coating Applied Select a value from the drop-down list. If you select Other from the list, enter the Other value in the field below.
Other If you selected Other from the drop-down list above, enter the value here.