New Placemark

From ProStar Geocorp

The New Place Mark functionality allows you to create objects (points, lines, polygons, eForms, pictures and sketches) on the map.Objects that you create on the map can be real-time GPS geo-referenced, or theycan be manually placed in a specific location.


Procedure

1. From the main map display, tap the New button (upper right corner). 
   The New Place Mark dialog box displays. 
PointMan New 1.png

2. From the System drop-down, select the applicable System
    - The type of System you select determines the Component options available. 
    - Each system has a color code associated with it so that when the object is logged, it is displayed in the correct American Public Works Association (APWA) color designation.
    - Selecting a System filters the list of Components available so that only those appropriate for that particular system are available for selection.

The DEFAULT system options are as follows: 

System Components
Electrical Cable
  Transformer
  Vault/Enclosure
  Ductbank
  Meter
  Pole
  Crossing Point
  Ground Bed
  Anode
  Photo
  Other Line
  Other Point
Gas Pipeline
  Valve
  Barrel
  Meter
  Crossing
  Weld
  Vent
  CP test Point
  CP/Ground Bed
  Photo
  Other Line
  Other Point
Oil Pipeline
  Valve
  Barrel
  Meter
  Crossing
  Weld
  Vent
  CP Test Point
  CP/Ground Bed
  Photo
  Other Line
  Other Point
Telecom Cable
  Vault/Enclosure
  Ductbank
  Crossing Point
  Photo
  Other Point
Photo Image
Sketch Map Image
  Grid Map
  Grid Image
Form Document
File Document
  IOS
  Agreement
Point of Concern Form
  Point
  GIS Discrepancy
Water Pipe
  Valve
  Meter
  Hydrant
  Crossing Point
  Pump Station
  Thrust Block
  Photo
  Other Line
  Other Point
Sanitary Sewer Pipe
  Valve
  Manhole
  Crossing Point
  Pump Station
  Photo
  Other Line
  Other Point
Drainage Pipe
  Valve
  Manhole
  Storm Drain
  Crossing Point
  Photo
  Other Line
  Other Point
Temp Survey Easement
  Workspace
  Datum
  Area
  Photo
  Other Line
  Other Point
Irrigation Line
  Valve
  Meter
  Crossing Point
  Pump
  Photo
  Other Point
Excavation Site Point Feature
  Line Feature
  Area
  Photo
Area of Concern Polygon
  Circle
  Photo
General Point Feature
  Line Feature
  Outline
  Residency Point

3. From the Component drop-down, select the type of object you want to create. 
    - The System/Component combination categorizes the type of object being created, the information related to it, and thus the steps to complete the process. 
    - If you have the setting, "Show As-Built settings on move" selected on the Settings page, you will be prompted for the following As-Built information after you select the System and Component options: Method As-Built or As-Found, Quality Level, and Antenna.

4. Tap OK to create the object and complete the details and process. 
    - The object is placed on the map, and the menu bar displays at the bottom of the screen. 
    - Tap Cancel to close the new Place Mark dialog and return to the main map display